Differences

This shows you the differences between two versions of the page.

--- admin:syslog [2019/06/18 19:20]
peppe
+++ admin:syslog [2022/09/20 11:28] (current)
peppe
@@ Line 1: / Line 1: @@
-/06/2019: [[https://linux.slashdot.org/story/19/06/17/2018227/linux-pcs-servers-gadgets-can-be-crashed-by-ping-of-death-network-packets|tcp_sack]] workaround: Όλα τα κεντρικά μηχανήματα.
+===== 20/09/2022 =====
+  * Αφαίρεση EMC VNXe3100 από uranus ως iSCSI 3xVolumes, αφαίρεση DAE με 6x NS-SAS δίσκους. Λειτουργία με 12x NL-SAS ως ενιαίο pool για backup μόνο. Οι υπόλοιποι δίσκοι μένουν για spare.
+===== 18/06/2019 =====
+  * [[https://linux.slashdot.org/story/19/06/17/2018227/linux-pcs-servers-gadgets-can-be-crashed-by-ping-of-death-network-packets|tcp_sack]] workaround: Όλα τα κεντρικά μηχανήματα.
+  * Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch.
+===== 19/06/2019 =====
+  * firmware update στο HP procurve 2848 2ου rack στην έκδοση I.10.107 [[admin:network|HP Procurve 2848]]
+  * Εγκατάσταση debian 9.9 στο HP DL385(G1)
+===== 20/06/2019 =====
+  * HP DL385G1 iLO upgrade to 1.96 (prev 1.84)
+  * eSATA external disk array installation on HP DL385G1, 4-disk RAID 1+0 via linux md
+==== HDD log on HP DL385G1 ====
+  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,0
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Vendor:               COMPAQ
+  Product:              BD3008A4C6
+  Revision:             HPB4
+  User Capacity:        300,000,000,000 bytes [300 GB]
+  Logical block size:   512 bytes
+  Rotation Rate:        10033 rpm
+  Logical Unit id:      0x500186200004070c
+  Serial number:        3KR2FBK600007701K4S9
+  Device type:          disk
+  Transport protocol:   Parallel SCSI (SPI-4)
+  Local Time is:        Thu Jun 20 23:19:02 2019 EEST
+  SMART support is:     Available - device has SMART capability.
+  SMART support is:     Enabled
+  Temperature Warning:  Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART Health Status: OK
+  Current Drive Temperature:     32 C
+  Drive Trip Temperature:        68 C
+  Elements in grown defect list: 1
+  Vendor (Seagate) cache information
+    Blocks sent to initiator = 390935534
+    Blocks received from initiator = 506060278
+    Blocks read from cache and sent to initiator = 2973598029
+    Number of read and write commands whose size <= segment size = 1774895633
+    Number of read and write commands whose size > segment size = 2140
+  Vendor (Seagate/Hitachi) factory information
+    number of hours powered up = 70614.57
+    number of minutes until next internal SMART test = 110
+  Error counter log:
+             Errors Corrected by           Total   Correction     Gigabytes    Total
+                 ECC          rereads/    errors   algorithm      processed    uncorrected
+             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
+  read:          0        0         0         0          0          0.000           0
+  write:         0        0         0         0          0          0.000           0
+  Non-medium error count:       60
+  No self-tests have been logged
+  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,1
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Vendor:               COMPAQ
+  Product:              BD3008A4C6
+  Revision:             HPB4
+  User Capacity:        300,000,000,000 bytes [300 GB]
+  Logical block size:   512 bytes
+  Rotation Rate:        10033 rpm
+  Logical Unit id:      0x50018620001ec724
+  Serial number:        3KR2LCPL00007704NWKB
+  Device type:          disk
+  Transport protocol:   Parallel SCSI (SPI-4)
+  Local Time is:        Thu Jun 20 23:19:05 2019 EEST
+  SMART support is:     Available - device has SMART capability.
+  SMART support is:     Enabled
+  Temperature Warning:  Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART Health Status: OK
+  Current Drive Temperature:     29 C
+  Drive Trip Temperature:        68 C
+  Elements in grown defect list: 0
+  Vendor (Seagate) cache information
+    Blocks sent to initiator = 990974850
+    Blocks received from initiator = 1603296594
+    Blocks read from cache and sent to initiator = 2327552920
+    Number of read and write commands whose size <= segment size = 1782220054
+    Number of read and write commands whose size > segment size = 2005
+  Vendor (Seagate/Hitachi) factory information
+    number of hours powered up = 70568.57
+    number of minutes until next internal SMART test = 110
+  Error counter log:
+             Errors Corrected by           Total   Correction     Gigabytes    Total
+                 ECC          rereads/    errors   algorithm      processed    uncorrected
+             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
+  read:          0        0         0         0          0          0.000           0
+  write:         0        0         0         0          0          0.000           0
+  Non-medium error count:       60
+  No self-tests have been logged
+  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,2
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Vendor:               COMPAQ
+  Product:              PROLIANT 6L4I
+  Revision:             0.20
+  >> Terminate command early due to bad response to IEC mode page
+  A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
+  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,3
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Vendor:               COMPAQ
+  Product:              BD3008A4C6
+  Revision:             HPB4
+  User Capacity:        300,000,000,000 bytes [300 GB]
+  Logical block size:   512 bytes
+  Rotation Rate:        10033 rpm
+  Logical Unit id:      0x50018620001eb124
+  Serial number:        3KR2LDL500007703H57Q
+  Device type:          disk
+  Transport protocol:   Parallel SCSI (SPI-4)
+  Local Time is:        Thu Jun 20 23:19:12 2019 EEST
+  SMART support is:     Available - device has SMART capability.
+  SMART support is:     Enabled
+  Temperature Warning:  Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART Health Status: OK
+  Current Drive Temperature:     29 C
+  Drive Trip Temperature:        68 C
+  Elements in grown defect list: 0
+  Vendor (Seagate) cache information
+    Blocks sent to initiator = 3670494718
+    Blocks received from initiator = 2457317184
+    Blocks read from cache and sent to initiator = 1049212278
+    Number of read and write commands whose size <= segment size = 2012647235
+    Number of read and write commands whose size > segment size = 2269
+  Vendor (Seagate/Hitachi) factory information
+    number of hours powered up = 70539.18
+    number of minutes until next internal SMART test = 110
+  Error counter log:
+             Errors Corrected by           Total   Correction     Gigabytes    Total
+                 ECC          rereads/    errors   algorithm      processed    uncorrected
+             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
+  read:          0        0         0         0          0          0.000           0
+  write:         0        0         0         0          0          0.000           0
+  Non-medium error count:       49
+  No self-tests have been logged
+  root@dl385g1:~# smartctl -a /dev/cciss/c0d0 -d cciss,4
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Vendor:               COMPAQ
+  Product:              BD3008A4C6
+  Revision:             HPB4
+  User Capacity:        300,000,000,000 bytes [300 GB]
+  Logical block size:   512 bytes
+  Rotation Rate:        10033 rpm
+  Logical Unit id:      0x5001862000040488
+  Serial number:        3KR2FD4A00007701KDKF
+  Device type:          disk
+  Transport protocol:   Parallel SCSI (SPI-4)
+  Local Time is:        Thu Jun 20 23:19:14 2019 EEST
+  SMART support is:     Available - device has SMART capability.
+  SMART support is:     Enabled
+  Temperature Warning:  Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART Health Status: OK
+  Current Drive Temperature:     31 C
+  Drive Trip Temperature:        68 C
+  Elements in grown defect list: 0
+  Vendor (Seagate) cache information
+    Blocks sent to initiator = 1041536572
+    Blocks received from initiator = 3292279049
+    Blocks read from cache and sent to initiator = 252592360
+    Number of read and write commands whose size <= segment size = 2110306074
+    Number of read and write commands whose size > segment size = 1991
+  Vendor (Seagate/Hitachi) factory information
+    number of hours powered up = 70607.15
+    number of minutes until next internal SMART test = 110
+  Error counter log:
+             Errors Corrected by           Total   Correction     Gigabytes    Total
+                 ECC          rereads/    errors   algorithm      processed    uncorrected
+             fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
+  read:          0        0         0         0          0          0.000           0
+  write:         0        0         0         0          0          0.000           0
+  Non-medium error count:      109
+  No self-tests have been logged
+  root@dl385g1:~# smartctl -a /dev/sda
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Model Family:     Western Digital RE3 Serial ATA
+  Device Model:     WDC WD1002FBYS-02A6B0
+  Serial Number:    WD-WMATV8487598
+  LU WWN Device Id: 5 0014ee 0ad172fba
+  Firmware Version: 03.00C06
+  User Capacity:    1,000,203,804,160 bytes [1.00 TB]
+  Sector Size:      512 bytes logical/physical
+  Rotation Rate:    7200 rpm
+  Device is:        In smartctl database [for details use: -P show]
+  ATA Version is:   ATA8-ACS (minor revision not indicated)
+  SATA Version is:  SATA 2.5, 3.0 Gb/s
+  Local Time is:    Thu Jun 20 23:19:29 2019 EEST
+  SMART support is: Available - device has SMART capability.
+  SMART support is: Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART overall-health self-assessment test result: PASSED
+  General SMART Values:
+  Offline data collection status:  (0x84) Offline data collection activity
+                                          was suspended by an interrupting command from host.
+                                          Auto Offline Data Collection: Enabled.
+  Self-test execution status:      (   0) The previous self-test routine completed
+                                          without error or no self-test has ever
+                                          been run.
+  Total time to complete Offline
+  data collection:                (18000) seconds.
+  Offline data collection
+  capabilities:                    (0x7b) SMART execute Offline immediate.
+                                          Auto Offline data collection on/off support.
+                                          Suspend Offline collection upon new
+                                          command.
+                                          Offline surface scan supported.
+                                          Self-test supported.
+                                          Conveyance Self-test supported.
+                                          Selective Self-test supported.
+  SMART capabilities:            (0x0003) Saves SMART data before entering
+                                          power-saving mode.
+                                          Supports SMART auto save timer.
+  Error logging capability:        (0x01) Error logging supported.
+                                          General Purpose Logging supported.
+  Short self-test routine
+  recommended polling time:        (   2) minutes.
+  Extended self-test routine
+  recommended polling time:        ( 208) minutes.
+  Conveyance self-test routine
+  recommended polling time:        (   5) minutes.
+  SCT capabilities:              (0x303f) SCT Status supported.
+                                          SCT Error Recovery Control supported.
+                                          SCT Feature Control supported.
+                                          SCT Data Table supported.
+  SMART Attributes Data Structure revision number: 16
+  Vendor Specific SMART Attributes with Thresholds:
+  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
+Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       1125
+Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       37
+Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
+Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
+Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       415
+Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
+Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
+Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       30
+Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       27
+Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       9
+Temperature_Celsius     0x0022   113   109   000    Old_age   Always       -       37
+Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
+Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
+Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
+UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
+Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
+  SMART Error Log Version: 1
+  No Errors Logged
+  SMART Self-test log structure revision number 1
+  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
+  # 1  Conveyance offline  Completed without error       00%        98         -
+  # 2  Conveyance offline  Completed without error       00%        37         -
+  # 3  Conveyance offline  Completed without error       00%        34         -
+  SMART Selective self-test log data structure revision number 1
+   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+  Selective self-test flags (0x0):
+    After scanning selected spans, do NOT read-scan remainder of disk.
+  If Selective self-test is pending on power-up, resume after 0 minute delay.
+  root@dl385g1:~# smartctl -a /dev/sdb
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Model Family:     Western Digital RE3 Serial ATA
+  Device Model:     WDC WD1002FBYS-02A6B0
+  Serial Number:    WD-WMATV8594117
+  LU WWN Device Id: 5 0014ee 0ad183a0e
+  Firmware Version: 03.00C06
+  User Capacity:    1,000,203,804,160 bytes [1.00 TB]
+  Sector Size:      512 bytes logical/physical
+  Rotation Rate:    7200 rpm
+  Device is:        In smartctl database [for details use: -P show]
+  ATA Version is:   ATA8-ACS (minor revision not indicated)
+  SATA Version is:  SATA 2.5, 3.0 Gb/s
+  Local Time is:    Thu Jun 20 23:19:32 2019 EEST
+  SMART support is: Available - device has SMART capability.
+  SMART support is: Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART overall-health self-assessment test result: PASSED
+  General SMART Values:
+  Offline data collection status:  (0x82) Offline data collection activity
+                                          was completed without error.
+                                          Auto Offline Data Collection: Enabled.
+  Self-test execution status:      (   0) The previous self-test routine completed
+                                          without error or no self-test has ever
+                                          been run.
+  Total time to complete Offline
+  data collection:                (18000) seconds.
+  Offline data collection
+  capabilities:                    (0x7b) SMART execute Offline immediate.
+                                          Auto Offline data collection on/off support.
+                                          Suspend Offline collection upon new
+                                          command.
+                                          Offline surface scan supported.
+                                          Self-test supported.
+                                          Conveyance Self-test supported.
+                                          Selective Self-test supported.
+  SMART capabilities:            (0x0003) Saves SMART data before entering
+                                          power-saving mode.
+                                          Supports SMART auto save timer.
+  Error logging capability:        (0x01) Error logging supported.
+                                          General Purpose Logging supported.
+  Short self-test routine
+  recommended polling time:        (   2) minutes.
+  Extended self-test routine
+  recommended polling time:        ( 208) minutes.
+  Conveyance self-test routine
+  recommended polling time:        (   5) minutes.
+  SCT capabilities:              (0x303f) SCT Status supported.
+                                          SCT Error Recovery Control supported.
+                                          SCT Feature Control supported.
+                                          SCT Data Table supported.
+  SMART Attributes Data Structure revision number: 16
+  Vendor Specific SMART Attributes with Thresholds:
+  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
+Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       1100
+Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       44
+Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
+Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
+Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       266
+Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
+Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
+Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       37
+Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       33
+Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       10
+Temperature_Celsius     0x0022   112   098   000    Old_age   Always       -       38
+Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
+Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
+Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
+UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
+Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
+  SMART Error Log Version: 1
+  No Errors Logged
+  SMART Self-test log structure revision number 1
+  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
+  # 1  Extended offline    Completed without error       00%       131         -
+  # 2  Conveyance offline  Completed without error       00%        32         -
+  SMART Selective self-test log data structure revision number 1
+   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+  Selective self-test flags (0x0):
+    After scanning selected spans, do NOT read-scan remainder of disk.
+  If Selective self-test is pending on power-up, resume after 0 minute delay.
+  root@dl385g1:~# smartctl -a /dev/sdc
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Model Family:     Western Digital Caviar Blue (SATA)
+  Device Model:     WDC WD5000AAKS-00A7B0
+  Serial Number:    WD-WMASY0139743
+  LU WWN Device Id: 5 0014ee 000803406
+  Firmware Version: 01.03B01
+  User Capacity:    500,106,780,160 bytes [500 GB]
+  Sector Size:      512 bytes logical/physical
+  Device is:        In smartctl database [for details use: -P show]
+  ATA Version is:   ATA8-ACS (minor revision not indicated)
+  SATA Version is:  SATA 2.5, 3.0 Gb/s
+  Local Time is:    Thu Jun 20 23:19:34 2019 EEST
+  SMART support is: Available - device has SMART capability.
+  SMART support is: Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART overall-health self-assessment test result: PASSED
+  General SMART Values:
+  Offline data collection status:  (0x84) Offline data collection activity
+                                          was suspended by an interrupting command from host.
+                                          Auto Offline Data Collection: Enabled.
+  Self-test execution status:      (   0) The previous self-test routine completed
+                                          without error or no self-test has ever
+                                          been run.
+  Total time to complete Offline
+  data collection:                (11580) seconds.
+  Offline data collection
+  capabilities:                    (0x7b) SMART execute Offline immediate.
+                                          Auto Offline data collection on/off support.
+                                          Suspend Offline collection upon new
+                                          command.
+                                          Offline surface scan supported.
+                                          Self-test supported.
+                                          Conveyance Self-test supported.
+                                          Selective Self-test supported.
+  SMART capabilities:            (0x0003) Saves SMART data before entering
+                                          power-saving mode.
+                                          Supports SMART auto save timer.
+  Error logging capability:        (0x01) Error logging supported.
+                                          General Purpose Logging supported.
+  Short self-test routine
+  recommended polling time:        (   2) minutes.
+  Extended self-test routine
+  recommended polling time:        ( 136) minutes.
+  Conveyance self-test routine
+  recommended polling time:        (   5) minutes.
+  SCT capabilities:              (0x303f) SCT Status supported.
+                                          SCT Error Recovery Control supported.
+                                          SCT Feature Control supported.
+                                          SCT Data Table supported.
+  SMART Attributes Data Structure revision number: 16
+  Vendor Specific SMART Attributes with Thresholds:
+  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
+Spin_Up_Time            0x0003   155   149   021    Pre-fail  Always       -       5225
+Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       0
+Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
+Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
+Power_On_Hours          0x0032   066   066   000    Old_age   Always       -       25210
+Spin_Retry_Count        0x0012   100   253   051    Old_age   Always       -       0
+Calibration_Retry_Count 0x0012   100   253   051    Old_age   Always       -       0
+Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       73
+Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       20
+Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       73
+Temperature_Celsius     0x0022   112   103   000    Old_age   Always       -       35
+Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
+Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
+Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
+UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
+Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0
+  SMART Error Log Version: 1
+  No Errors Logged
+  SMART Self-test log structure revision number 1
+  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
+  # 1  Extended offline    Completed without error       00%     14026         -
+  # 2  Extended offline    Completed without error       00%     10404         -
+  SMART Selective self-test log data structure revision number 1
+   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+  Selective self-test flags (0x0):
+    After scanning selected spans, do NOT read-scan remainder of disk.
+  If Selective self-test is pending on power-up, resume after 0 minute delay.
+  root@dl385g1:~# smartctl -a /dev/sdd
+  smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
+  Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
+  === START OF INFORMATION SECTION ===
+  Model Family:     Western Digital Caviar Blue (SATA)
+  Device Model:     WDC WD5000AAKS-00A7B0
+  Serial Number:    WD-WMASY0127191
+  LU WWN Device Id: 5 0014ee 0ab2aee67
+  Firmware Version: 01.03B01
+  User Capacity:    500,107,862,016 bytes [500 GB]
+  Sector Size:      512 bytes logical/physical
+  Device is:        In smartctl database [for details use: -P show]
+  ATA Version is:   ATA8-ACS (minor revision not indicated)
+  SATA Version is:  SATA 2.5, 3.0 Gb/s
+  Local Time is:    Thu Jun 20 23:19:35 2019 EEST
+  SMART support is: Available - device has SMART capability.
+  SMART support is: Enabled
+  === START OF READ SMART DATA SECTION ===
+  SMART overall-health self-assessment test result: PASSED
+  General SMART Values:
+  Offline data collection status:  (0x80) Offline data collection activity
+                                          was never started.
+                                          Auto Offline Data Collection: Enabled.
+  Self-test execution status:      (   0) The previous self-test routine completed
+                                          without error or no self-test has ever
+                                          been run.
+  Total time to complete Offline
+  data collection:                (12000) seconds.
+  Offline data collection
+  capabilities:                    (0x7b) SMART execute Offline immediate.
+                                          Auto Offline data collection on/off support.
+                                          Suspend Offline collection upon new
+                                          command.
+                                          Offline surface scan supported.
+                                          Self-test supported.
+                                          Conveyance Self-test supported.
+                                          Selective Self-test supported.
+  SMART capabilities:            (0x0003) Saves SMART data before entering
+                                          power-saving mode.
+                                          Supports SMART auto save timer.
+  Error logging capability:        (0x01) Error logging supported.
+                                          General Purpose Logging supported.
+  Short self-test routine
+  recommended polling time:        (   2) minutes.
+  Extended self-test routine
+  recommended polling time:        ( 140) minutes.
+  Conveyance self-test routine
+  recommended polling time:        (   5) minutes.
+  SCT capabilities:              (0x303f) SCT Status supported.
+                                          SCT Error Recovery Control supported.
+                                          SCT Feature Control supported.
+                                          SCT Data Table supported.
+  SMART Attributes Data Structure revision number: 16
+  Vendor Specific SMART Attributes with Thresholds:
+  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+Raw_Read_Error_Rate     0x000f   100   253   051    Pre-fail  Always       -       0
+Spin_Up_Time            0x0003   157   157   021    Pre-fail  Always       -       5116
+Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       2
+Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
+Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
+Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       5
+Spin_Retry_Count        0x0012   100   253   051    Old_age   Always       -       0
+Calibration_Retry_Count 0x0012   100   253   051    Old_age   Always       -       0
+Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
+Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       3
+Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       7
+Temperature_Celsius     0x0022   113   095   000    Old_age   Always       -       34
+Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
+Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
+Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      -       0
+UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
+Multi_Zone_Error_Rate   0x0008   100   253   051    Old_age   Offline      -       0
+  SMART Error Log Version: 1
+  No Errors Logged
+  SMART Self-test log structure revision number 1
+  No self-tests have been logged.  [To run self-tests, use: smartctl -t]
+  SMART Selective self-test log data structure revision number 1
+   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+        0        0  Not_testing
+  Selective self-test flags (0x0):
+    After scanning selected spans, do NOT read-scan remainder of disk.
+  If Selective self-test is pending on power-up, resume after 0 minute delay.
+===== 24/06/2019 =====
+  * HP Procurve 2848 switches updated to latest firmware.
-/06/2019: Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch.

Επιτροπή Συστημάτων ΤΜΗΥΠ

User Tools

Site Tools

Differences

Page Tools