This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
admin:syslog [2019/06/20 09:53] peppe |
admin:syslog [2022/09/20 11:28] (current) peppe |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | 18/06/2019 | + | ===== 20/09/2022 ===== |
- | * [[https:// | + | * Αφαίρεση EMC VNXe3100 |
- | 18/06/2019 | + | ===== 18/ |
+ | * [[https:// | ||
* Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch. | * Στήσιμο 2ου data center rack με επισκευασμένο HP DL380G6, KVM monitor, HP Procurve 2848 switch. | ||
- | 19/ | + | ===== 19/ |
- | * firmware update στο HP procurve 2848 2ου rack στην έκδοση I.10.107 | + | * firmware update στο HP procurve 2848 2ου rack στην έκδοση I.10.107 |
* Εγκατάσταση debian 9.9 στο HP DL385(G1) | * Εγκατάσταση debian 9.9 στο HP DL385(G1) | ||
- | 20/ | + | ===== 20/ |
- | * HP DL385G1 iLO upgrade to 1.96 | + | * HP DL385G1 iLO upgrade to 1.96 (prev 1.84) |
* eSATA external disk array installation on HP DL385G1, 4-disk RAID 1+0 via linux md | * eSATA external disk array installation on HP DL385G1, 4-disk RAID 1+0 via linux md | ||
+ | |||
+ | ==== HDD log on HP DL385G1 ==== | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 10033 rpm | ||
+ | Logical Unit id: 0x500186200004070c | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Thu Jun 20 23:19:02 2019 EEST | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | | ||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | | ||
+ | Elements in grown defect list: 1 | ||
+ | | ||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 390935534 | ||
+ | Blocks received from initiator = 506060278 | ||
+ | Blocks read from cache and sent to initiator = 2973598029 | ||
+ | Number of read and write commands whose size <= segment size = 1774895633 | ||
+ | Number of read and write commands whose size > segment size = 2140 | ||
+ | | ||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 70614.57 | ||
+ | number of minutes until next internal SMART test = 110 | ||
+ | | ||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: 0 0 | ||
+ | write: | ||
+ | | ||
+ | Non-medium error count: | ||
+ | | ||
+ | No self-tests have been logged | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 10033 rpm | ||
+ | Logical Unit id: 0x50018620001ec724 | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Thu Jun 20 23:19:05 2019 EEST | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | | ||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | | ||
+ | Elements in grown defect list: 0 | ||
+ | | ||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 990974850 | ||
+ | Blocks received from initiator = 1603296594 | ||
+ | Blocks read from cache and sent to initiator = 2327552920 | ||
+ | Number of read and write commands whose size <= segment size = 1782220054 | ||
+ | Number of read and write commands whose size > segment size = 2005 | ||
+ | | ||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 70568.57 | ||
+ | number of minutes until next internal SMART test = 110 | ||
+ | | ||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: 0 0 | ||
+ | write: | ||
+ | | ||
+ | Non-medium error count: | ||
+ | | ||
+ | No self-tests have been logged | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | >> Terminate command early due to bad response to IEC mode page | ||
+ | A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' | ||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 10033 rpm | ||
+ | Logical Unit id: 0x50018620001eb124 | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Thu Jun 20 23:19:12 2019 EEST | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | | ||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | | ||
+ | Elements in grown defect list: 0 | ||
+ | | ||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 3670494718 | ||
+ | Blocks received from initiator = 2457317184 | ||
+ | Blocks read from cache and sent to initiator = 1049212278 | ||
+ | Number of read and write commands whose size <= segment size = 2012647235 | ||
+ | Number of read and write commands whose size > segment size = 2269 | ||
+ | | ||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 70539.18 | ||
+ | number of minutes until next internal SMART test = 110 | ||
+ | | ||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: 0 0 | ||
+ | write: | ||
+ | | ||
+ | Non-medium error count: | ||
+ | | ||
+ | No self-tests have been logged | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Vendor: | ||
+ | Product: | ||
+ | Revision: | ||
+ | User Capacity: | ||
+ | Logical block size: 512 bytes | ||
+ | Rotation Rate: 10033 rpm | ||
+ | Logical Unit id: 0x5001862000040488 | ||
+ | Serial number: | ||
+ | Device type: disk | ||
+ | Transport protocol: | ||
+ | Local Time is: Thu Jun 20 23:19:14 2019 EEST | ||
+ | SMART support is: | ||
+ | SMART support is: | ||
+ | Temperature Warning: | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART Health Status: OK | ||
+ | | ||
+ | Current Drive Temperature: | ||
+ | Drive Trip Temperature: | ||
+ | | ||
+ | Elements in grown defect list: 0 | ||
+ | | ||
+ | Vendor (Seagate) cache information | ||
+ | Blocks sent to initiator = 1041536572 | ||
+ | Blocks received from initiator = 3292279049 | ||
+ | Blocks read from cache and sent to initiator = 252592360 | ||
+ | Number of read and write commands whose size <= segment size = 2110306074 | ||
+ | Number of read and write commands whose size > segment size = 1991 | ||
+ | | ||
+ | Vendor (Seagate/ | ||
+ | number of hours powered up = 70607.15 | ||
+ | number of minutes until next internal SMART test = 110 | ||
+ | | ||
+ | Error counter log: | ||
+ | | ||
+ | | ||
+ | fast | delayed | ||
+ | read: 0 0 | ||
+ | write: | ||
+ | | ||
+ | Non-medium error count: | ||
+ | | ||
+ | No self-tests have been logged | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: | ||
+ | Device Model: | ||
+ | Serial Number: | ||
+ | LU WWN Device Id: 5 0014ee 0ad172fba | ||
+ | Firmware Version: 03.00C06 | ||
+ | User Capacity: | ||
+ | Sector Size: 512 bytes logical/ | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: | ||
+ | SATA Version is: SATA 2.5, 3.0 Gb/s | ||
+ | Local Time is: Thu Jun 20 23:19:29 2019 EEST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | | ||
+ | General SMART Values: | ||
+ | Offline data collection status: | ||
+ | was suspended by an interrupting command from host. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: | ||
+ | Offline data collection | ||
+ | capabilities: | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 208) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 5) minutes. | ||
+ | SCT capabilities: | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | | ||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME | ||
+ | 1 Raw_Read_Error_Rate | ||
+ | 3 Spin_Up_Time | ||
+ | 4 Start_Stop_Count | ||
+ | 5 Reallocated_Sector_Ct | ||
+ | 7 Seek_Error_Rate | ||
+ | 9 Power_On_Hours | ||
+ | 10 Spin_Retry_Count | ||
+ | 11 Calibration_Retry_Count 0x0032 | ||
+ | 12 Power_Cycle_Count | ||
+ | 192 Power-Off_Retract_Count 0x0032 | ||
+ | 193 Load_Cycle_Count | ||
+ | 194 Temperature_Celsius | ||
+ | 196 Reallocated_Event_Count 0x0032 | ||
+ | 197 Current_Pending_Sector | ||
+ | 198 Offline_Uncorrectable | ||
+ | 199 UDMA_CRC_Error_Count | ||
+ | 200 Multi_Zone_Error_Rate | ||
+ | | ||
+ | SMART Error Log Version: 1 | ||
+ | No Errors Logged | ||
+ | | ||
+ | SMART Self-test log structure revision number 1 | ||
+ | Num Test_Description | ||
+ | # 1 Conveyance offline | ||
+ | # 2 Conveyance offline | ||
+ | # 3 Conveyance offline | ||
+ | | ||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: | ||
+ | Device Model: | ||
+ | Serial Number: | ||
+ | LU WWN Device Id: 5 0014ee 0ad183a0e | ||
+ | Firmware Version: 03.00C06 | ||
+ | User Capacity: | ||
+ | Sector Size: 512 bytes logical/ | ||
+ | Rotation Rate: 7200 rpm | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: | ||
+ | SATA Version is: SATA 2.5, 3.0 Gb/s | ||
+ | Local Time is: Thu Jun 20 23:19:32 2019 EEST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | | ||
+ | General SMART Values: | ||
+ | Offline data collection status: | ||
+ | was completed without error. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: | ||
+ | Offline data collection | ||
+ | capabilities: | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 208) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 5) minutes. | ||
+ | SCT capabilities: | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | | ||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME | ||
+ | 1 Raw_Read_Error_Rate | ||
+ | 3 Spin_Up_Time | ||
+ | 4 Start_Stop_Count | ||
+ | 5 Reallocated_Sector_Ct | ||
+ | 7 Seek_Error_Rate | ||
+ | 9 Power_On_Hours | ||
+ | 10 Spin_Retry_Count | ||
+ | 11 Calibration_Retry_Count 0x0032 | ||
+ | 12 Power_Cycle_Count | ||
+ | 192 Power-Off_Retract_Count 0x0032 | ||
+ | 193 Load_Cycle_Count | ||
+ | 194 Temperature_Celsius | ||
+ | 196 Reallocated_Event_Count 0x0032 | ||
+ | 197 Current_Pending_Sector | ||
+ | 198 Offline_Uncorrectable | ||
+ | 199 UDMA_CRC_Error_Count | ||
+ | 200 Multi_Zone_Error_Rate | ||
+ | | ||
+ | SMART Error Log Version: 1 | ||
+ | No Errors Logged | ||
+ | | ||
+ | SMART Self-test log structure revision number 1 | ||
+ | Num Test_Description | ||
+ | # 1 Extended offline | ||
+ | # 2 Conveyance offline | ||
+ | | ||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: | ||
+ | Device Model: | ||
+ | Serial Number: | ||
+ | LU WWN Device Id: 5 0014ee 000803406 | ||
+ | Firmware Version: 01.03B01 | ||
+ | User Capacity: | ||
+ | Sector Size: 512 bytes logical/ | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: | ||
+ | SATA Version is: SATA 2.5, 3.0 Gb/s | ||
+ | Local Time is: Thu Jun 20 23:19:34 2019 EEST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | | ||
+ | General SMART Values: | ||
+ | Offline data collection status: | ||
+ | was suspended by an interrupting command from host. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: | ||
+ | Offline data collection | ||
+ | capabilities: | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 136) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 5) minutes. | ||
+ | SCT capabilities: | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | | ||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME | ||
+ | 1 Raw_Read_Error_Rate | ||
+ | 3 Spin_Up_Time | ||
+ | 4 Start_Stop_Count | ||
+ | 5 Reallocated_Sector_Ct | ||
+ | 7 Seek_Error_Rate | ||
+ | 9 Power_On_Hours | ||
+ | 10 Spin_Retry_Count | ||
+ | 11 Calibration_Retry_Count 0x0012 | ||
+ | 12 Power_Cycle_Count | ||
+ | 192 Power-Off_Retract_Count 0x0032 | ||
+ | 193 Load_Cycle_Count | ||
+ | 194 Temperature_Celsius | ||
+ | 196 Reallocated_Event_Count 0x0032 | ||
+ | 197 Current_Pending_Sector | ||
+ | 198 Offline_Uncorrectable | ||
+ | 199 UDMA_CRC_Error_Count | ||
+ | 200 Multi_Zone_Error_Rate | ||
+ | | ||
+ | SMART Error Log Version: 1 | ||
+ | No Errors Logged | ||
+ | | ||
+ | SMART Self-test log structure revision number 1 | ||
+ | Num Test_Description | ||
+ | # 1 Extended offline | ||
+ | # 2 Extended offline | ||
+ | | ||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | root@dl385g1: | ||
+ | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build) | ||
+ | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | ||
+ | | ||
+ | === START OF INFORMATION SECTION === | ||
+ | Model Family: | ||
+ | Device Model: | ||
+ | Serial Number: | ||
+ | LU WWN Device Id: 5 0014ee 0ab2aee67 | ||
+ | Firmware Version: 01.03B01 | ||
+ | User Capacity: | ||
+ | Sector Size: 512 bytes logical/ | ||
+ | Device is: In smartctl database [for details use: -P show] | ||
+ | ATA Version is: | ||
+ | SATA Version is: SATA 2.5, 3.0 Gb/s | ||
+ | Local Time is: Thu Jun 20 23:19:35 2019 EEST | ||
+ | SMART support is: Available - device has SMART capability. | ||
+ | SMART support is: Enabled | ||
+ | | ||
+ | === START OF READ SMART DATA SECTION === | ||
+ | SMART overall-health self-assessment test result: PASSED | ||
+ | | ||
+ | General SMART Values: | ||
+ | Offline data collection status: | ||
+ | was never started. | ||
+ | Auto Offline Data Collection: Enabled. | ||
+ | Self-test execution status: | ||
+ | without error or no self-test has ever | ||
+ | been run. | ||
+ | Total time to complete Offline | ||
+ | data collection: | ||
+ | Offline data collection | ||
+ | capabilities: | ||
+ | Auto Offline data collection on/off support. | ||
+ | Suspend Offline collection upon new | ||
+ | command. | ||
+ | Offline surface scan supported. | ||
+ | Self-test supported. | ||
+ | Conveyance Self-test supported. | ||
+ | Selective Self-test supported. | ||
+ | SMART capabilities: | ||
+ | power-saving mode. | ||
+ | Supports SMART auto save timer. | ||
+ | Error logging capability: | ||
+ | General Purpose Logging supported. | ||
+ | Short self-test routine | ||
+ | recommended polling time: ( 2) minutes. | ||
+ | Extended self-test routine | ||
+ | recommended polling time: ( 140) minutes. | ||
+ | Conveyance self-test routine | ||
+ | recommended polling time: ( 5) minutes. | ||
+ | SCT capabilities: | ||
+ | SCT Error Recovery Control supported. | ||
+ | SCT Feature Control supported. | ||
+ | SCT Data Table supported. | ||
+ | | ||
+ | SMART Attributes Data Structure revision number: 16 | ||
+ | Vendor Specific SMART Attributes with Thresholds: | ||
+ | ID# ATTRIBUTE_NAME | ||
+ | 1 Raw_Read_Error_Rate | ||
+ | 3 Spin_Up_Time | ||
+ | 4 Start_Stop_Count | ||
+ | 5 Reallocated_Sector_Ct | ||
+ | 7 Seek_Error_Rate | ||
+ | 9 Power_On_Hours | ||
+ | 10 Spin_Retry_Count | ||
+ | 11 Calibration_Retry_Count 0x0012 | ||
+ | 12 Power_Cycle_Count | ||
+ | 192 Power-Off_Retract_Count 0x0032 | ||
+ | 193 Load_Cycle_Count | ||
+ | 194 Temperature_Celsius | ||
+ | 196 Reallocated_Event_Count 0x0032 | ||
+ | 197 Current_Pending_Sector | ||
+ | 198 Offline_Uncorrectable | ||
+ | 199 UDMA_CRC_Error_Count | ||
+ | 200 Multi_Zone_Error_Rate | ||
+ | | ||
+ | SMART Error Log Version: 1 | ||
+ | No Errors Logged | ||
+ | | ||
+ | SMART Self-test log structure revision number 1 | ||
+ | No self-tests have been logged. | ||
+ | | ||
+ | SMART Selective self-test log data structure revision number 1 | ||
+ | | ||
+ | 1 0 0 Not_testing | ||
+ | 2 0 0 Not_testing | ||
+ | 3 0 0 Not_testing | ||
+ | 4 0 0 Not_testing | ||
+ | 5 0 0 Not_testing | ||
+ | Selective self-test flags (0x0): | ||
+ | After scanning selected spans, do NOT read-scan remainder of disk. | ||
+ | If Selective self-test is pending on power-up, resume after 0 minute delay. | ||
+ | |||
+ | ===== 24/06/2019 ===== | ||
+ | |||
+ | * HP Procurve 2848 switches updated to latest firmware. | ||
+ | |||